ACE-C232
PS/2 Size AT Power Supply

Features

The ACE-C232 includes two ACE-R232A redundant power modules.

The two power modules are parallel used.

The ACE-C232 could be used in ICP Chassis, for example: RACK-305A, PAC-170, MPC-6010,...etc.

Power Fault Warning:

In case one power module failed, the buzzer and LED will act.   After pushing reset button, the buzzer stops and the LED still light until the failed power module is fixed.

ACE-R232A 230W Redundant Power Module

 Input: 90V to 130V AC or 180V to 260V AC selectable

Outputs (Max. Output Power 230W at 30^oC)

Ripple and Noise: The peak to peak ripple and noise for +5V output is less than 50mV, for +/-12V and +5V output is less than 100mV.

Line Regulation: The line regulation for each output is less +/-1% while measuring at rated load and +/-10% of 115V AC or 230V AC input voltage changing.

Load Regulation: The output voltage load regulation is less than the following values by changing each output and +/-40% from 60% rated load, and keep all other outputs at 60% rated load.
           -5V : +/-4%       +12V : +/-5%       -12V : +/-2%       -5V : +/-2%

Hold Up Time: >16ms

Power Good Signal: Go high 100ms to 500ms after all output DC voltages are within regulation limits.

Efficiency: 70% typical

Output Protection: Over Voltage Protection and Short Protection

Operating Temperature: 0^oC ~ 50^oC ( derating about 20% from 30^oC to 50^oC )

Storage Temperature: -40^oC ~ 85^oC

Cooling: Cooling with a 42CFM forced air

MTBF: 176,530Hrs

Safety Standards: UL 1950, CSA22.2 No.234, EN 60950

EMI Standard: ECC docket 20780 curve " B ", EN55022 class " B "

Connectors: ECC docket 20780 curve "B", EN55022 class "B"

Connectors: DIN 41612 C96

Pin Assignment: