Input Table :

Output Table (at 40oC) :

Inrush Current (ACE-723A/B) : Not exceed 15A@115V AC or 30A@230V AC
Ripple and Noise : Less than 100mV
Line Regulation : The line regulation for each outputs are less than +/-1%, while measuring at rated loading and +/-10% of input voltage changing
Load Regulation : Less than +/-1%@+/-5V and -12V, +/-4%@+12V and +24V (ACE-723B)
Efficiency : Higher than 75%
Hold-up Time (ACE-723A/B) : 20ms (typical)@115V AC
Protection : Over voltage protection. The trip point is around 5.9V ~ 7.0V output
Thermal Protection : Built in 110+/-5ºC thermal switch in HS1
Altitude : 0 ~ 10,000ft
Vibration : 10 ~ 55Hz at 2G 3min. period, 30 min. along X, Y and Z axis
Impact : 10G for 20ms once on each X, Y and Z axis
Hi-pot isolation :
- 4300V DC, input to output for one minute
- 2200V DC, input to ground for one minute
MTBF :
- ACE-723A : 206,500 Hours
- ACE-723B : 206,300 Hours
- ACE-723T : 206,700 Hours
- ACE-723C : 205,900 Hours
Safety : Meets UL 478, 1012, 1950; CSA 22.2 No. 234, VDE EN 60950
EMI : Meets FCC docket 20780 curve "A",
EN50081-2 : CISPR22 "A"
EMS Standard (Designed to meet the following limits) :
- EN 50082-2
- IEC 801-1 8KV (Air Discharge) criteria B
- IEC 801-3, 10V/M criteria A
- IEC 801-4, 2KV criteria B
- IEC 801-5, 2KV criteria B
Built-in cooling fan
Operating Temperature : -20ºC ~ 70ºC
(Derating curve will occur 50ºC ~ 70ºC)
Storage Temperature : -20ºC ~ 85ºC
Dimensions : 112(W) x 51(H) x 203(D)mm; (4.4" x 2" x 8")