Input Table :

Output Table (at 50oC) :

Inrush Current (ACE-716A/716AP) : Not exceed 15A@115V AC or 30A@230V AC
Ripple and Noise : Less than 100mV
Line Regulation : The line regulation for each outputs are less than +/-1%, while measuring at rated loading and +/-10% of input voltage changing
Load Regulation :
- ACE-716A/716AP : Less than +/-3%@+/-5V and -12V, +/-6%@+12V
- ACE-716T/C : Less than +/-1%@+/-5V and -12V, +/-4%@+12V
Efficiency :
- ACE-716A/716AP : Higher than 75%
- ACE-716T/C : Higher than 70%
Hold-up Time (ACE-716A/716AP) : 20ms (typical)@115V AC
Altitude : 0 ~ 10,000ft
Protection : Over voltage protection. The trip point is around 5.9V ~ 7.0V output
Thermal Protection : Built in 110?oC thermal switch in HS1
Vibration : 10 ~ 55Hz at 2G 3min. period, 30 min. along X, Y and Z axis
Impact : 10G for 20ms once on each X, Y and Z axis
Hi-pot isolation :
- 4300V DC, input to output for one minute
- 2200V DC, input to ground for one minute
MTBF :
- ACE-716A : 188,800 hours
- ACE-716T : 212,050 hours
- ACE-716C : 187,490 hours
Safety : Meets UL 478, 1012, 1950; CSA 22.2 No. 234, VDE EN 60950
EMI :
- Meets FCC docket 20780 curve "A", EN50081-2 : CISPR22 "A"
- Harmonic EN 61000-3-2 for ACE-716AP
EMS Standard (Designed to meet the following limits) :
- EN 50082-2
- IEC 801-1 8KV (Air Discharge) criteria B (ACE-716A/716AP)
- IEC 801-3, 10V/M criteria A
- IEC 801-4, 2KV criteria B (ACE-716A/716AP)
- IEC 801-5, 2KV criteria B (ACE-716A/716AP)
Built-in cooling fan
Operating Temperature : -20ºC ~ 70ºC
(Derating curve will occur 50ºC ~ 70ºC)
Storage Temperature : -20ºC ~ 85ºC
Dimensions : 97(W) x 40.5(H) x 198(D)mm; (3.8" x 1.6" x 7.8")