Features
- Universal PCI, PCI-X, 3.3V and 5V compatible (Call for PCI-Express availability)
- Sixteen optically-isolated, non-polarized digital inputs
- Opto-isolated channel to channel and channel to ground
- Sixteen fully protected FET outputs
- Can detect input state change and assert interrupt
- No switches or jumpers to set, all options software selectable
Specifications
Digital Inputs
- Number of inputs: 16.
- Type: Non-polarized, optically isolated from each other and from the computer.
- Input voltage range: 2.5 to 50V DC or 2-36VrmsAC (50 to 10000 Hz) with 0.2V hysteresis.
- Isolation: 500V*(see manual) channel to channel and channel to ground.
- Input Resistance: The opto-isolator diode current is constant at 4 mA typically regardless of input voltage.
- Interrupts: When enabled by software, interrupts are generated when any digital input changes state (High to Low or Low to High, and from signal to no signal or no signal to signal with AC inputs).
- Response Time: 5 mSec w/ filter.
Protected FET Outputs
- Number of outputs: Sixteen. In two groups of 8 channels each. In each group 4 channels are totally isolated and 4 channels have a common ground.
- Output Type: High Side Power MOS FET Switch. Protected against short circuit, over temperature, ESD, capable of driving inductive loads.
- Compliance Voltage: 5-50DC Volts (customer supplied).
- Current: 1A.
- Turn-on time: Rise time: 50usec. Turn-on delay: 50usec.
- Turn-off time: Fall time: 50usec. Turn-off delay: 50usec.
- Power Required: +5VDC at 0.250A.
Environmental
- Operating Temperature: 0° to 70° C.
- Storage Temperature: -40° to +85° C.
- Humidity: 5 to 95%, non-condensing.
- Weight: Approx. 12 oz. (340 grams).
- Size: 6.8" long (173 mm).
Regulatory Compliance
- This product is in full compliance with CE requirements.
